Every router has its own IP address on your home network, and you need it whenever you want to open the router's settings: to change the Wi-Fi name or password, set up a guest network, or check who is connected. That address has a technical name — the default gateway — because it is the door your devices use to reach everything beyond your home network.

The address is usually something like 192.168.0.1 or 192.168.1.1, but guessing wastes time when a network uses something else. This guide shows how to read the exact gateway address from the device already in your hand, on Windows, Mac, Android and iPhone, and what to expect when you type it into a browser.

Find the router address on Windows

The ipconfig command prints it directly:

  1. Open Command Prompt (Start, type cmd, Enter).
  2. Type ipconfig and press Enter.
  3. Find the adapter you are actually using — Wireless LAN adapter Wi-Fi or Ethernet adapter — and read the Default Gateway line. That is your router's IP address.

Prefer clicks? Settings > Network & internet, open the properties of your connected network, and the gateway appears in the network details on newer Windows versions. The Command Prompt route works on every version and shows all adapters at once, which is why it is the one support staff quote.

Find the router address on a Mac

  1. Open System Settings (or System Preferences) and click Network.
  2. Select the connection you are using — Wi-Fi or Ethernet.
  3. Click Details next to the connected network (or Advanced on older versions), then the TCP/IP tab. The address labelled Router is the gateway.

Terminal alternative: route -n get default prints a line beginning "gateway:" followed by the address.

Find the router address on Android and iPhone

iPhone: Settings > Wi-Fi, tap the (i) next to the connected network, and read the Router line under IPv4 Address — it sits right below your phone's own IP address on the same screen.

Android: Settings > Network & internet > Internet, tap the connected Wi-Fi network, and look for Gateway in the network details (you may need to expand an "Advanced" section). On Samsung phones: Settings > Connections > Wi-Fi, tap the gear beside the network, then View more — the gateway is listed with the other IP settings. As always with Android, exact wording varies by brand, but the word to hunt for is "Gateway".

These phone screens only show the gateway for the Wi-Fi network you are connected to right now — which is exactly the router you are standing near and want to manage.

Open the router's settings with the address

  1. Type the gateway address into a browser's address bar — just the number, like 192.168.1.1, with no "www". Some newer routers also answer to a name (for example, a manufacturer setup address printed on the label).
  2. A login page appears. The default username and password are printed on the router's sticker or in its manual — common combinations are admin/admin or admin with a printed password. If you (or whoever set the router up) changed them, use the changed ones.
  3. Once in, the status page confirms you are in the right place: it shows your public IP, the Wi-Fi networks, and the list of connected devices.
Two cautions: if the login page never appears, you are probably not connected to that router's network (mobile data and VPNs must be off for this). And if the default admin password still works, change it — the router's admin page controls your whole home network, and the defaults for every model are public knowledge.

What “default gateway” actually means

Devices on your home network can talk to each other directly, using their private addresses. Anything outside — every website, every server — must be sent to the router first, and the router forwards it on. The router is therefore the "gateway" out of your network, and because it is the route used whenever no more specific route exists, it is the default gateway. That is why the same number appears in every device's network details, and why a wrong gateway setting leaves a device able to see the printer but unable to load any website.

If you cannot connect to the network at all

All the methods above read the gateway from a connected device. If nothing will connect — after a router replacement, for instance — work from the physical side instead:

  • Read the router's label. Many routers print their setup address on the sticker, either as an IP address or as a setup name (a short web address the router answers to on its own network).
  • Connect by cable. A laptop plugged directly into a router LAN port with an Ethernet cable gets an address even when the Wi-Fi is misconfigured or off — then ipconfig shows the gateway as usual.
  • Check your provider's app or paperwork. Routers supplied by an internet provider are often managed from the provider's app, which shows the router's details and can open its settings without you needing the address at all. The welcome letter or setup email usually lists the model and its default access details too.
  • As a last resort, the common defaults. 192.168.0.1 and 192.168.1.1 cover most home routers, with 192.168.1.254 and 10.0.0.1 also in use. Trying them costs nothing — but only on your own network, and only once you are connected to it.

Key takeaways

  • The router's IP is the “Default Gateway” in your device's network details — on Windows, run ipconfig and read the gateway line for your active adapter.
  • On iPhone it is the “Router” line in the Wi-Fi network details; on a Mac, the “Router” field in Network > TCP/IP; on Android, look for “Gateway”.
  • Type the address into a browser to open the router's admin page; the default login is usually on the router's sticker.
  • Change the router's default admin password if it has never been changed.

Quick questions

192.168.1.1 does not open anything. What is wrong?

Most likely your router uses a different address — do not guess, read the gateway using the steps above for your device. Also check you are connected to that router's Wi-Fi (not mobile data), that any VPN is off, and that you typed the address into the address bar, not a search box.

Is the router's IP the same as my public IP?

No. The gateway address (192.168.x.x) is private — it only exists inside your home. Your public IP is a different address, assigned by your provider to the router's internet side. Our guide to checking your IP address explains both and how to find each.

I forgot the router admin password. Can I recover it?

There is no “forgot password” flow on most routers. If the defaults on the sticker do not work and nobody remembers the changed password, the only route is a factory reset (holding the reset button), after which the sticker defaults work again — but the router must then be set up from scratch, including your Wi-Fi name and password.

Why do I see several default gateways in ipconfig?

One per adapter — Wi-Fi, Ethernet, and any virtual adapters from VPNs or virtual machines. The one that matters is under the adapter you are actually using for your connection; disconnected adapters may show no gateway at all.

Further reading: Essential network settings and tasks in Windows — Microsoft Support.